|
|
|
| home > safety
flooring > miscellaneous > industrial tiles |
|
|
|
Industrial
Tiles
EcoTile is a versatile heavy duty flooring that introduces numerous
advantages over conventional finishes. Ideal for new, or the refurbishment
of existing floors.
Consisting of flexible 7mm thick interlocking tiles, EcoTile
is manufactured from 100% re-cycled PVC and is available in nine
standard colours and two surface textures.
EcoTile can be laid over any hard surface with minimal
or no surface preparation, ensuring quick and trouble free installation
even on damaged, damp or contaminated substrates.
|
|
|
|
|
- Extremely hard wearing, resilient
and durable
- Resistant to most solvents
and chemicals
- Reduces damage caused
by impact, abrasion or vibration
- Quick and simple to
install, causing minimum disruption to site
activities
- Impervious surface
ensures ease of maintenance
- Helps minimise damage to dropped tools and equipment
- Provides excellent thermal and acoustic insulation
- Good anti-slip and
fatigue relieving properties, improving safety and productivity
- Layout is flexible,
add or take away tiles to suit your changing requirements
- A cost effective and
long term solution to your flooring
Typical Areas of Use
EcoTile is suitable for floors that experience
high levels of traffic, impact, abrasion or vibration damage, solvent
and chemical spills. The tiles can be loose laid over any
hard surface, including concrete, wood or metal to create a hard
wearing, dust free and safe anti-slip work surface.
Ideal for factories, warehouses, print rooms, clean rooms, sorting
offices, coin rooms, shops & offices, public buildings, schools,
canteens, corridors, fitness centres or garages.
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| An Asset,
not a Liability
EcoTile's unique design means that you can alter, add or take
away tiles to suit your changing requirements. The system
is transportable, take it with you as you grow.
With TPM at the forefront of most engineers minds, EcoTile
will ensure minimum downtime during both installation and maintenance. In
the event of an accident, damaged tiles can be lifted and replaced
quickly and simply.
Installation
EcoTile is quick and simple to install using either your
own labour, local contractors or EcoTile's team of experienced
fitters. All materials are supplied with detailed installation
guidelines.
|
|
|
|
 No special tools or equipment are required, all you will
need is a mallet, an electric jigsaw to cut the tiles to size, a
measure, chalk line, a sharp knife and some knee pads! 
Installation of EcoTile should commence from the centre of the
floor, working outwards in a circular pattern. It is important
to remember to leave a 5mm gap in-between the tiles and any fixed
point (ie walls and machinery) to allow the tiles free movement
to expand and contract.
EcoTile ramp sections are available in the nine standard colours, in either the raised disk or flat textured surface finish. We are also able to supply a wide range of sit on skirting, floor repair compounds and connector profiles to compliment the EcoTile range. 
Cleaning, Maintenance and After
Sales Service
EcoTile is quick and simple to clean, damp mopping, machine or hand scrubbing is ideal.
To help maintain EcoTile's appearance and anti-slip characteristics two/three coats of sealer should be applied to the tiles after installation. Our technical department would be pleased to offer further advice on cleaning and maintenance as required.
EcoTile is covered by a five year warranty covering all manufacturing defects. |
|
TECHNICAL
DATA
Combustability: |
DIN 51960
BS 476 - part 1
ASTM E84 |
Klasse 1
Class 2
Class 1 |
Electrical Resistance: |
DIN 53482
DIN 53482
DIN 51953 |
Roa - 1 x 1014Ohm
gD = 8.6 x 1013Ohm cm
>106 Ohm m |
| Anti-slip: |
ASTM C-1028-89 |
Good static coefficient
of friction |
Mechanical Resistance: |
DIN 53504 |
17 N/mm2 |
| |
|
Dry 1.12/Wet 1.05 |
Resistance to Wear: |
DIN 53516 |
89.47mm3 |
Chemical Resistance: |
DIN 51958 |
Hydrochloric Acid 96%, Ethanol 96%, Methanol
100%
Acetic Acid 100%, Nitric Acid 69%, Sulphuric Acid,
Chromic Acid 40%, Oils, Gasoline, Urine |
PRODUCT DESCRIPTION
| Tiles: |
Interlocking by means of 48 dovetail joints |
|
|
| Manufacturing: |
Injection Moulding |
Thickness: |
7mm |
| Material: |
PVC (100% recycled) |
Weight: |
approx 8.3 kg/m2 |
| Tile Dimensions: |
500 x 500mm |
Hardness: |
>87 shore A |
| Ramp Dimensions: |
500 x 120mm |
Surface Texture: |
Raised Disk or Flat Texture |
Raised:12.100
Flat: 12.101 |
Raised:12.200
Flat: 12.201 |
Raised:12.220
Flat: 12.221 |
Raised:12.300
Flat: 12.301 |
Raised:12.320
Flat: 12.321 |
Raised:12.400
Flat: 12.401 |
Raised:12.500
Flat: 12.501 |
Raised:12.600
Flat: 12.601 |
Raised:12.700
Flat: 12.701 |
Other colours available by request and subject to
a minimum order quantity
|
"PICTOTILE" FLOOR
MARKING SYMBOLS
PictoTiles can be inserted into your EcoTile floor to create
highly visible signs in the event of smoke obscuring conventional signs
or to highlight safety hazards.
The markings go right through the tile to create a permanent
durable sign resistant to wear and abrasion
|
|
|
|
|
|
Raised:13.630
Flat: 13.631 |
Raised:13.410
Flat: 13.411 |
Raised:13.550
Flat: 13.551 |
Raised:13.640
Flat: 13.641 |
Raised:13.660
Flat: 13.661 |
Raised:13.420
Flat: 13.421 |
|
|
| |
